MARTIN ETHER2DMX8 (8 UNIVERSE) COMPLETE

MARTIN ETHER2DMX8 (8 UNIVERSE) COMPLETE

Rental Price  Regular price$500.00
/
Prices Are Subject To Change Without Notice

Ether2DMX8 is a highly capable DMX router and much more! As a DMX router, it translates Artnet protocol into DMX in/out universes but can also be used as a DMX merger, DMX splitter hub, fail safe device, cue playback, and DMX viewer monitor. As an extension for the M-Series console it provides 8 DMX ports. When connected to a standalone PC, the Ether2DMX8 also becomes the license key for M-PC and provides 64 DMX Universes.

FEATURES

  • Artnet to DMX conversion
  • DMX to Artnet conversion
  • 10 Factory Presets
  • 10 User Presets
  • 99 Cues with Fade Time, Hold Time and Cue Linking
  • 8 Switch Inputs
  • 8 XLR female 5pins
  • DMX Monitor
  • DMX and Artnet Test Generator
  • Multiple Artnet IP in for backup system
  • USB port for backup and firmware update
  • M-PC License with 64 x DMX512

SPECIFICATIONS
PHYSICAL

  • Length: 288 mm (11.4 in.)
  • Width: 482.2 mm (19.0 in.), 19-inch rackmount
  • Height: 43.6 mm (1.8 in.), 1U
  • Weight: 3.6 kg (8.0 lbs.)

CONTROL/USER INTERFACE

  • Front panel display with 4-button control menu
  • 1 x dual-color LED per port
  • Mouse & keyboard input
  • Remote web access
  • DMX viewer for any physical incoming or outgoing DMX port

HARDWARE

  • 520 MHz processor for fast DMX output
  • Ethernet
  • Art-Net-compliant, Art-Net II-compliant
  • ACN-ready
  • Built-in webpage for quick access and remote setup
  • 10/100 Mbit connection
  • 8 ports
  • Configurable as input or output
  • Opto-isolated circuit for each port
  • User-definable DMX timings for each port
  • Each port set as output can be set to constantly repeat the last received DMX frame, or only to output new frames
  • RDM-ready
  • Dual-color LED for each port
  • 8 open-contact inputs
  • Inputs transmit Art-Net-compatible contact closures on the network
  • Contact closures can trigger factory and user presets and start cue playback

SOFTWARE

  • 10 user presets for device configuration
  • M-Series, Maxedia use preset with auto-IP address setting
  • Presets for DMX Hub and Splitter functionality
  • Mergeable setup where multiple inputs are routed in LTP, HTP to one output
  • Ports assignable to input or output
  • Ports routable to/from internal ports or to/from any DMX universe on Art-Net
  • Port routing triggerable by contact closure through the use of user presets
  • DMX channel ranges of ports configurable
  • Merger modules routable between inputs and outputs and/or Art-Net universes
  • Channel ranges can be put in LTP/HTP, copy or fixed value from other channels
  • Auto or manual IP addressing
  • Tracking backup function: automatic handover to another Art-Net signal if one Art-Net signal fails
  • DMX and Art-Net test pattern generator
  • Art-Net broadcast and unicast compatible
  • Configuration files loadable/storable on USB memory sticks
  • Firmware upload via USB memory stick

CONSTRUCTION

  • Housing: Steel and aluminum
  • Finish: Electrostatic powder-coated
  • INSTALLATION
  • 19-inch rackmount (1U)

CONNECTIONS

  • 10/100 base-T ethernet port: Neutrik locking RJ45 Ethercon socket
  • DMX in/out ports: 8 x 5-pin female XLR
  • Backup, software upload: USB
  • AC power input: 3-pin IEC male socket
  • AC power throughput: 3-pin IEC female socket

ELECTRICAL

  • AC power: Auto-ranging 100 - 240 VAC nominal, 50/60 Hz
  • Main fuse: 2 x 500 mA T (slow-blow)

TYPICAL POWER AND CURRENT

  • 100 V, 60 Hz: 220 mA
  • Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like


Recently viewed