MARTIN QUANTUM PROFILE FIXTURE COMPLETE

This extremely bright LED profile fixture combines top-quality white light with a fast, smooth CMY color mixing system and crisp gobo projection on surfaces as well as mid-air.

With all this and the new Animotion™ FX system that allows never-before seen beam animations, the market is now finally seeing the first real 700/800 W discharge lamp replacement in a profile fixture that effectively harnesses cutting-edge LED technology.

• First real alternative to a 700/800 watt HID fixture
• Flat field, crisp image, high contrast
• Full feature set including CMY color mixing and 1:3 zoom

• First real alternative to a 700/800 watt HID fixture
• Flat field, crisp image, high contrast
• Full feature set including CMY color mixing and 1:3 zoom
• Very low weight and compact design
• Super high-speed movements and effects
• Consistent photometric performance via latest LED technology

• Length: 452 mm (17.8 in.)
• Width: 431 mm (17.0 in.) across yoke
• Height:
• 642 mm (25.3 in.) head straight up
• 648 mm (25.5 in.) maximum
• Weight: 23.2 kg (51.1 lbs.)
  

• Color mixing: CMY, independently variable 0 - 100%
• Color wheel: 6 color filters plus open
• Beam effects: Rotating three-facet prism
• Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
• Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake
• Iris: 0 - 100%, pulse effects
• Shutter effect: Electronic, with variable speed regular and random strobe
• Electronic dimming: Four dimming curve options
• Zoom: Motorized
• Pan: 540°
• Tilt: 268°
• Pan and tilt speed: Adjustable via onboard control panel and DMX
• Focus: Motorized, with zoom-focus tracking

• Control systems: DMX
• Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt
• DMX channels: 19/27
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• RDM: Implemented
• Setting and addressing: Control panel with backlit graphic display
• Transceiver: RS-485
• Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box

• Zoom range: 12° - 36° (1:3)
• Light source: 475 W LED engine
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• LED refresh rate: 3000 Hz
• Default color temperature: 6000 K
• Output: 12,700 lumens

*Figure obtained under manufacturer´s test conditions

PHOTOMETRIC DATA
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

CONSTRUCTION

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Protection rating: IP20

INSTALLATION

• Mounting points: 4 pairs of quarter-turn locks
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 0.2 m
• Minimum distance to illuminated surfaces: 2.0 m

CONNECTIONS

• AC power input: Neutrik PowerCon
• DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL

• AC power: 120-240 V AC nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch mode
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
• Power Factor: 0.99 @ 120 V / 208 V / 230 V / 240 V
• Typical current draw: 4.8 A @ 120 V , 2.8 A @ 208 V , 2.5 A @ 230 V , 2.4 A @ 240 V *
• Power Consumption
• Maximum: 750 W
• Typical: 576 W *
• Idle: 50 W *

* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.

THERMAL

• Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
• Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
• Maximum ambient temperature (Ta max.): 40° C
• Minimum ambient temperature (Ta min.): 5° C

ENVIRONMENTAL

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 21
• LWR*:
• LWR = Lumen-to-Weight Ratio